|
Elementary Education Courses numbered X37; X97; 300, 400, 500 are described in the University Academic Policies section of this catalog. |
|
-
ELED 490 - Teaching Laboratory Diagnosis of students, lesson preparation, videotaped peer teaching, analysis of teaching, lesson redesign. Repeatable up to 8 credits, including original course.
Prerequisites & Notes: ELED 472 or ELED 470.
Credits: 1-4 Grade Mode: S/U
|
|
-
ELED 490A - September Experience Observation and participation in the opening of school. S/U grading.
Prerequisites & Notes: department permission
Credits: 2 TO 3 Grade Mode: S/U
|
|
-
ELED 491 - September Experience Observation and participation in the opening of school. S/U grading.
Prerequisites & Notes: Department permission.
Credits: 2-3 Grade Mode: S/U
|
|
-
ELED 492 - Practicum: Experience in Literacy Methods In-school experience observing and teaching reading and language arts. S/U grading.
Prerequisites & Notes: ELED 480 and 481.
Credits: 4 Grade Mode: S/U
|
|
-
ELED 494 - Internship - Elementary Supervised teaching experience to develop and demonstrate teaching competence at the primary and/or intermediate grades. Repeatable to 24 cr. S/U grading.
Prerequisites & Notes: recommended for supervised teaching
Credits: 2-18 Grade Mode: S/U
|
|
-
ELED 495 - Internship - Early Childhood Education Observation and participation in the opening of school. S/U grading.
Prerequisites & Notes: Department permission.
Credits: 2-24 Grade Mode: S/U
|
|
-
ELED 496 - Elementary Intern Study Group Support school internship experience and students’ efforts to engage in ambitious teaching practices that support diverse learners.
Prerequisites & Notes: ELED 470
Credits: 1-2 Grade Mode: S/U
|
|
-
ELED 505 - Books and Materials: Use and Evaluation Study and selection of children’s and adolescent literature (fiction and poetry). Literary criticism. Use of various media.
Prerequisites & Notes: ELED 405 or permission
Credits: 4 Grade Mode: Letter
|
|
-
ELED 518 - Current Issues in Education Examination and discussion of several current issues in Elementary Education. Repeatable to a maximum of 5 credits.
Prerequisites & Notes: Graduate status or permission of instructor.
Credits: 1-5 Grade Mode: Letter
|
|
-
ELED 521 - Seminar in Elementary Curriculum Advanced study of curriculum planning and development, including design, materials and problems in curriculum change. Independent research is expected.
Prerequisites & Notes: completion of teaching certification requirement; elementary K-8 teaching endorsement
Credits: 4 Grade Mode: Letter
|
|
-
ELED 530 - Play and the Child Examination of the nature and role of play in the cognitive, affective, physical and social development of the child. Attention given to the educative functions of play and implications of those functions for curriculum and instruction.
Prerequisites & Notes: graduate standing or teaching experience
Credits: 4 Grade Mode: Letter
|
|
-
ELED 531 - Seminar in Early Childhood Education In-depth exploration of programs, theories and significant recent research in early childhood education.
Prerequisites & Notes: Permission of instructor
Credits: 4 Grade Mode: Letter
|
|
-
ELED 531A - Advanced Seminar in Early Childhood Education Specific problems are drawn from the field and content organized according to student need.
Prerequisites & Notes: ELED 531, ELED 596A
Credits: 4 Grade Mode: Letter
|
|
-
ELED 533 - Advanced Seminar in Elementary Education Advanced study of individual research topics in elementary education.
Prerequisites & Notes: advancement to candidacy
Credits: 4 Grade Mode: Letter
|
|
-
ELED 535 - Research Analysis of Current Issues in Elementary Education Examination and analysis of research underlying current issues and problems in elementary education.
Prerequisites & Notes: completion of teaching certification requirement; elementary K-8 teaching endorsement; EDU 501
Credits: 4 Grade Mode: Letter
|
|
-
ELED 538 - Current Issues in Assessment and Evaluation in Elementary Literacy Education Examines current theory, research, and practice in classroom-based literacy assessment and evaluation; includes supervised practicum.
Prerequisites & Notes: ELED 480 and ELED 481 or instructor permission
Credits: 4 Grade Mode: Letter
|
|
-
ELED 539 - Master’s Seminar Preparation and presentation of a seminar paper on a problem or issue in education.
Prerequisites & Notes: completion of teaching certification requirements; elementary K-8 endorsement; advancement to candidacy; ELED 501, ELED 521, ELED 535; EDF 512, EDF 513
Credits: 4 Grade Mode: Letter
|
|
-
ELED 555 - Middle School Curriculum Designs and Instructional Strategies Current trends in middle-level education; includes a review of developing curriculum ideas endorsed by the National Middle School Association. Physical, social and emotional growth of early adolescents; instructional strategies for middle-level schools; requires topical or action research project.
Credits: 4 Grade Mode: Letter
|
|
-
ELED 569A - Issues in Inclusive Early Education Current issues and best practices in early childhood program design and implementation. Emphasis on family-centered, play-based interagency models that serve children of all abilities. Applied research focus.
Prerequisites & Notes: admission to graduate school or instructor permission
Credits: 3 Grade Mode: Letter
|
|
-
ELED 569B - Assessment of Young Children (Birth-8 Years) Issues and resources for accurate and appropriate assessment of young children. Current best practices in instructionally relevant assessment, monitoring child progress and evaluating overall program success. Alternative strategies for assessing the very young child, family needs and special populations. Emphasis on critical evaluation of instruments, psychometric adequacy and technical aspects of test development.
Prerequisites & Notes: admission to graduate school or instructor permission
Credits: 4 Grade Mode: Letter
|
|
-
ELED 569C - Inclusive Curriculum in Early Childhood Curriculum development and adaptation for infants, toddlers, and preschool children. Includes available resources, best practices with the developmentally young and play-based criteria. Focus on model program curricular approaches, the use of daily routines and parent-child interaction as a context and content for curriculum, and peer-mediated learning strategies. Emphasis on efficacy research and the impact of various curricular models.
Prerequisites & Notes: admission to graduate school or instructor permission
Credits: 3 Grade Mode: Letter
|
|
-
ELED 583 - Literacy and Children’s Literature Teaching basic reading skills through the use of children’s books; selection and analysis of children’s books in order to teach literacy, from beginning or pre-word recognition levels through junior/senior high level.
Prerequisites & Notes: teaching experience
Credits: 4 Grade Mode: Letter
|
|
-
ELED 584 - Teaching the Integrated Language Arts Teaching activities designed to foster continuing development of literacy, in part, through stressing interrelationships between the various forms of language.
Prerequisites & Notes: graduate standing or teaching experience
Credits: 4 Grade Mode: Letter
|
|
-
ELED 585 - Seminar in Literacy Education Literacy education research and its application to classroom practices, to individual problems in the teaching of reading, to supervision and administration of reading programs.
Prerequisites & Notes: Permission of instructor
Credits: 3-4 Grade Mode: Letter
|
|
-
ELED 586 - Seminar for Literacy Specialists Summary course in the Masters in Literacy, focuses on the role of the future literacy specialist in the analysis, correction, and prevention of literacy difficulties. Designed to refine the teacher leader’s knowledge of assessment, evaluation, planning, and teaching of readers, writers, and language users. Includes a 20 hour practicum.
Prerequisites & Notes: ELED 518 or permission of instructor.
Credits: 5 Grade Mode: Letter
|
|
-
ELED 587 - Improvement of Instruction in Literacy Teaching developmental reading; methods, materials, theory.
Prerequisites & Notes: minimum of one previous course in teaching of reading or teaching experience
Credits: 4 Grade Mode: Letter
|
|
-
ELED 589 - Language Acquisition and Literacy Development Exploration of current theories in language acquisition, linguistics and psycholinguistics, and implications for early childhood education and literacy instruction.
Prerequisites & Notes: graduate standing or teaching experience
Credits: 4 Grade Mode: Letter
|
|
-
ELED 594E - Practicum in Reading Diagnosis and Remediation Assessment and correction of reading difficulties: supervised practica in use of diagnostic reading tests.
Prerequisites & Notes: Graduate status or permission of instructor.
Credits: 4 Grade Mode: Letter
|
|
-
ELED 594F - Practicum in Reading Diagnosis and Remediation Remedial instruction of children with reading problems: clinical practicum.
Prerequisites & Notes: Graduate status or permission of instructor.
Credits: 4 Grade Mode: Letter
|
|
-
ELED 690 - Thesis Research study under the direction of a faculty committee. Repeatable to a maximum of 9 cr. S/U grading
Prerequisites & Notes: advancement to candidacy; student’s graduate committee approval
Credits: 1-9 Grade Mode: S/U
|
|
-
ELED 691 - Research Seminar Graduate research under the direction of a program advisor/committee. Repeatable to a maximum of 6 cr. S/U grading.
Prerequisites & Notes: student’s graduate committee/program advisor approval
Credits: 1-6 Grade Mode: S/U
|
Engineering Technology Courses numbered X37; X97; 300, 400, 500 are described in the University Academic Policies section of this catalog. |
|
-
ETEC 110 - Engineering Design Graphics I Introduction to the engineering design process. Course topics include the design process, ideation sketching, communication drawing, documentation drawing, three-dimensional Computer-Aided Design for product development.
Prerequisites & Notes: Variable lab fee.
Credits: 3 Grade Mode: Letter
|
|
-
ETEC 111 - Engineering Design Graphics II Second course in engineering design graphics. Includes further study of the design process, creating design specifications, Computer-Aided Design and Drafting for parametric modeling, assembly modeling and technical drawing, rapid prototyping.
Prerequisites & Notes: ETEC 110 or equivalent
Credits: 3 Grade Mode: Letter
|
|
-
ETEC 112 - Introduction to Engineering, Design and Graphics Introduces students to the field of engineering, the design process and communication of ideas with graphics. Includes team design projects, drawing instruction and assignments, overviews of the different engineering disciplines, engineering history, case studies of engineering feats and failures, and how things are made.
Credits: 3 Grade Mode: Letter
|
|
-
ETEC 113 - Introduction to Computer-Aided Design Introduction to parametric, Computer-Aided Design. Covers sketching and feature-based modeling in the creation of 3D parts for engineered products, assembly modeling and drafting. Emphasizes modeling of machined and plastic components and generation of drawings with proper dimensioning and GDT.
Prerequisites & Notes: ETEC 112 or concurrent.
Credits: 4 Grade Mode: Letter
|
|
-
ETEC 214 - Sophomore Industrial Design I Introductory industrial design studio course explores the use of different media and techniques to create innovative solutions for two- and three-dimensional design problems. Emphasis on fundamental design principles, ability to express new ideas, and awareness of the consumer market.
Prerequisites & Notes: ETEC 231
Credits: 5 Grade Mode: Letter
|
|
-
ETEC 215 - History of Industrial Design A historical overview of mass-produced products, the designers who created them, and their influence on our culture and society. International perspective covering significant events from the Industrial Revolution to the present.
Credits: 3 Grade Mode: Letter
|
|
-
ETEC 216 - Sophomore Industrial Design II Second industrial design studio course focusing on more difficult design problems and using a more comprehensive design methodology. Additional emphasis on idea generation, human factors, basic mechanics and fabrication of models.
Prerequisites & Notes: ETEC 214.
Credits: 5 Grade Mode: Letter
|
|
-
ETEC 220 - Introduction to Engineering Materials The relationship between the properties, structure and processes of engineering materials is discussed. Emphasis on the fundamentals of selecting materials based on engineering design criteria. Also offered as MSCI 201.
Prerequisites & Notes: CHEM 121 or CHEM 125; and (MATH 157 and PHYS 114) or (MATH 124 and PHYS 161) or concurrent.
Credits: 4 Grade Mode: Letter
|
|
-
ETEC 224 - Applied Engineering Statics Principles and basic concepts of statics including: vector analysis applied to equilibrium of rigid body systems and subsystems, force and moment resultants, free body diagrams, internal forces and friction. Analysis of basic structural and machine systems and components. Shear and moment diagrams. Fundamentals of linear algebra and the solution of simultaneous systems.
Prerequisites & Notes: MATH 125 or concurrent; PHYS 161 or departmental permission.
Credits: 4 Grade Mode: Letter
|
|
-
ETEC 225 - Strength of Materials Internal response of structural members to forces; principal stresses and strains; combined stresses.
Prerequisites & Notes: ETEC 220, ETEC 224; MATH 125
Credits: 5 Grade Mode: Letter
|
|
-
ETEC 226 - Engineering Dynamics Kinematics and kinetics of particles and rigid bodies, including methods of work and energy, and impulse and momentum.
Prerequisites & Notes: ETEC 224, MATH 224
Credits: 4 Grade Mode: Letter
|
|
-
ETEC 231 - Design Problems in Woodworking Wood as a material for solving a variety of design problems. Learn the safe and effective use of woodworking tools and techniques.
Prerequisites & Notes: ETEC 112 or concurrent.
Credits: 4 Grade Mode: Letter
|
|
-
ETEC 246 - Manufacturing Processes I An introduction to the manufacturing processes used to cast, form, cut, and join metal when creating parts per an engineering drawing. Students will be introduced, but not limited, to Foundry, Forming, Joining and Manual Machining processes.
Prerequisites & Notes: MATH 115 or higher; ETEC 113; ETEC 220 or ETEC 301 or concurrent; or permission of instructor.
Credits: 4 Grade Mode: Letter
|
|
-
ETEC 270 - Electronics Seminar Introduction to careers in electronics. Seminars presented by industrial representatives and Western faculty. Topics include sales and customer service, product development and design, manufacturing, entrepreneurial opportunities, marketing, and an introduction to computer tools. S/U grading.
Credits: 1 Grade Mode: S/U
|
|
-
ETEC 271 - Circuit Analysis I Fundamental properties of electrical components and their use in DC and AC circuits. Use of basic laws and theorems in circuit analysis and design. Laboratory experiments with electrical components and circuits.
Prerequisites & Notes: MATH 114 or concurrent.
Credits: 5 Grade Mode: Letter
|
|
-
ETEC 272 - Electronic Devices and Circuits A first course in electronic devices and circuits. Fundamental properties of semiconductor devices and their behavior in electronic circuits. Laboratory experiments in construction, testing, investigation and troubleshooting.
Prerequisites & Notes: ETEC 271
Credits: 4 Grade Mode: Letter
|
|
-
ETEC 273 - Digital Electronics Introductory digital electronics with emphasis on basic digital concepts, Boolean algebra, digital integrated circuit devices and the major functional units from building block approach. Laboratory with applications, constructing, testing and troubleshooting of digital circuits.
Prerequisites & Notes: ETEC 271, EET major or written permission
Credits: 4 Grade Mode: Letter
|
|
-
ETEC 274 - Fundamentals of Microprocessors Introduction to microprocessors and programming concepts. Study of structured programming, instruction sets, hardware and interfacing techniques. Laboratory experiments with popular units.
Prerequisites & Notes: ETEC 273; CSCI 140 or CSCI 141; EET major or written permission.
Credits: 5 Grade Mode: Letter
|
|
-
ETEC 280 - Power Mechanics Design principles of major power sources: including Otto cycle, Clerk cycle, Diesel, Wankel, Stirling cycle and Rankine cycle engines.
Credits: 5 Grade Mode: Letter
|
|
-
ETEC 281 - Power Transmission Principles and practices of mechanical transmission of power. Gear drive, chain drive, belt drive, overrunning clutches, universal joints, synchromesh transmissions and limited slip differentials are covered in theory and practice.
Prerequisites & Notes: ETEC 280 or concurrent.
Credits: 5 Grade Mode: Letter
|
|
-
ETEC 301 - Materials for Design Fundamentals of materials technology for industrial design majors. Properties and processing of materials with an emphasis on plastics.
Prerequisites & Notes: ETEC 110 or ETEC 112.
Credits: 5 Grade Mode: Letter
|
|
-
ETEC 311 - Perspective and Rendering I First half of course explores perspective systems, shadow construction, reflections and other aspects of technical drawing as they apply to industrial design. Second half applies perspective skills to realistic marker rendering of materials and products as well as rapid visualization as an informal means of expressing new ideas quickly.
Prerequisites & Notes: ETEC 112 or permission of instructor.
Credits: 4 Grade Mode: Letter
|
|
-
ETEC 312 - Industrial Design CAD Skills Computer-intensive course focusing on solid modeling, advanced rendering techniques, vector-based drawing and raster-based image editing relevant to industrial design that will enable students to present and communicate product design concepts skillfully.
Prerequisites & Notes: ETEC 311 or concurrent or permission of instructor.
Credits: 4 Grade Mode: Letter
|
|
-
ETEC 314 - Junior Industrial Design I Studio course work emphasizing a comprehensive design methodology which includes market research, problem identification, idea generation, implementation and presentation. Additional focus on a team approach.
Prerequisites & Notes: Acceptance into junior industrial design program.
Credits: 5 Grade Mode: Letter
|
|
-
ETEC 315 - Perspective and Rendering II Advanced applications of perspective and rendering will include further exploration in various media including the use of computers in generating product images.
Prerequisites & Notes: ETEC 311
Credits: 4 Grade Mode: Letter
|
|
-
ETEC 316 - Junior Industrial Design II Studio course work focusing on the development of a concept from the research phase to a three-dimensional model that is submitted to a national competition. Emphasis on concise project explanation, descriptive drawings and quality photo-documentation of model.
Prerequisites & Notes: ETEC 314
Credits: 5 Grade Mode: Letter
|
|
-
ETEC 318 - Junior Industrial Design III Studio course work focusing on a collaborative project with industry. Assignments are jointly directed by the instructor and industry. Students are expected to relate to the industry sponsor as their client and perform their work professionally.
Prerequisites & Notes: ETEC 316
Credits: 5 Grade Mode: Letter
|
|
-
ETEC 322 - Numerical Control Operations Laboratory-intensive course which provides students with the opportunity to design, program and produce NC and CNC manufactured parts.
Prerequisites & Notes: ETEC 246; limited to Manufacturing Engineering Technology, Manufacturing Engineering Technology-CAD/CAM and Plastics Engineering Technology majors during Phase I.
Credits: 4 Grade Mode: Letter
|
|
-
ETEC 325 - Manufacturing Process Planning Process planning for manufacturing. Determination of process steps. Workstation design, including ergonomic, safety, and health considerations. Introduction to engineering economics.
Prerequisites & Notes: ETEC 246; MATH 245 or concurrent or equivalent.
Credits: 4 Grade Mode: Letter
|
|
-
ETEC 326 - Fluid Power Fluid properties, basic principles of pneumatic and hydraulic power components and systems, control techniques, and fluid system analysis and design.
Prerequisites & Notes: MATH 125; CSCI 140 or equivalent; ETEC 225, ETEC 351 or concurrent.
Credits: 4 Grade Mode: Letter
|
|
-
ETEC 327 - Manufacturing Economics Examines many techniques to factor cost into manufacturing decisions. Topics covered include capital allocation, product cost estimating, work measurement, value engineering and budgeting.
Prerequisites & Notes: MATH 115 or higher; ETEC 246.
Credits: 3 Grade Mode: Letter
|
|
-
ETEC 333 - Polymer Technology Polymer science and analysis of basic plastics materials; experience in product design, tooling, and processing of thermoplastic.
Prerequisites & Notes: ETEC 112 and ETEC 220.
Credits: 5 Grade Mode: Letter
|
|
-
ETEC 334 - Reinforced Plastics/Composites Polymer and reinforcement systems; material testing; mold design and development; laboratory involvement in reinforced plastics production processes.
Prerequisites & Notes: ETEC 333
Credits: 5 Grade Mode: Letter
|
|
-
ETEC 335 - Tooling for Plastics Processing Design and construction of various types of production molds that are used for processing plastics. Product design in relationship to molding techniques and various techniques and materials used to construct the molds are the major units of study. Extensive lab work.
Prerequisites & Notes: ETEC 322; ETEC 333; ETEC 338 or ETEC 362.
Credits: 4 Grade Mode: Letter
|
|
-
ETEC 338 - Injection Molding Theory and practice of injection molding. Analysis of machine functions, processing parameters, production tooling, process control systems, quality assurance, automation, theology of polymers, heat transfer. Extensive lab experience.
Prerequisites & Notes: ETEC 333 and PHYS 163
Credits: 4 Grade Mode: Letter
|
|
-
ETEC 341 - Engineering and Society Explores the relationship between the engineering profession and society, and the role of communication in engineering. Proposals, reports, documentation of procedures, presentations, and communication to multiple audiences will be discussed and practiced.
Prerequisites & Notes: ENG 101; COMM 101 or COMM 235; ETEC 246 or ETEC 271; ETEC 422 or concurrent OR ETEC 430 or concurrent.
Credits: 4 Grade Mode: Letter
|
|
-
ETEC 344 - Industrial Quality Assurance Quality assurance as applied to industrial manufacturing operations. One-fourth of this course is used to enhance and expand on applied statistics.
Prerequisites & Notes: MATH 240 or MATH 245
Credits: 4 Grade Mode: Letter
|
|
-
ETEC 346 - Manufacturing and Design Product design with an emphasis on material selection and the processes that can be used for the selected material to manufacture the desired part.
Prerequisites & Notes: ETEC 246; ETEC 325 or ETEC 327; COMM 101.
Credits: 4 Grade Mode: Letter
|
|
-
ETEC 351 - Electronics for Engineering Technology I Analysis of basic electric circuits, design of simple analog and digital circuits including power supplies, transistor amplifiers, operational amplifiers, timers and logic devices. Laboratory reinforces the circuit concepts presented in the classroom and promotes competent use of basic electronic instruments. Cannot be taken for credit by EET majors.
Prerequisites & Notes: PHYS 162; MATH 125 or concurrent.
Credits: 4 Grade Mode: Letter
|
|
-
ETEC 352 - Electronics for Engineering Technology II Analysis and design of advanced analog and digital circuits, three-phase power, magnetic circuits, transformers, DC and AC motors. Cannot be taken for credit by EET majors.
Prerequisites & Notes: ETEC 351 and PHYS 162.
Credits: 4 Grade Mode: Letter
|
|
-
ETEC 354 - Electronics for Engineering Technology III The characteristics and use of typical transducers and sensors used to monitor or control industrial processes. Study of programmable logic controllers and other microprocessor-based systems used to monitor and control industrial processes. Cannot be taken for credit by EET majors.
Prerequisites & Notes: ETEC 352; EET majors cannot take for credit
Credits: 4 Grade Mode: Letter
|
|
-
ETEC 361 - Advanced CAD: Assembly and Design Mechanisms Advanced topics in computer-aided design and parametric modeling, including advanced part design, top-down assembly design, and modeling and simulation of mechanisms.
Prerequisites & Notes: MATH 125; PHYS 161 or PHYS 114 or PHYS 121; ETEC 113.
Credits: 4 Grade Mode: Letter
|
|
-
ETEC 362 - Advanced CAD: Surface Modeling Advanced topics in computer-aided design and parametric modeling with a focus on surface modeling for creating complex and free-form shapes.
Prerequisites & Notes: ETEC 113
Credits: 4 Grade Mode: Letter
|
|
-
ETEC 371 - Circuit Analysis II A second course in DC and AC circuits with increased emphasis on mathematical techniques used in electrical circuit analysis and design. Use of network theorems, vector analysis techniques, polyphase circuits and additional topics. Structured laboratory with emphasis on measurement, theory and applications, test equipment, verification of circuit laws, data analysis and formal report preparation.
Prerequisites & Notes: ETEC 271, MATH 124
Credits: 5 Grade Mode: Letter
|
|
-
ETEC 372 - Electronic Analysis and Design A second course in electronic devices and circuits with increased emphasis on mathematical modeling and techniques used in analysis and design. Study of semiconductor theory and devices, small and large signal amplifier configurations, hybrid-pi models, frequency response and multistage circuits. Laboratory with emphasis on practical design, construction, testing and evaluation. Formal report preparation.
Prerequisites & Notes: ETEC 272, ETEC 371; EET major or written permission
Credits: 5 Grade Mode: Letter
|
|
-
ETEC 373 - Digital Systems An upper-division course in digital system analysis and design including the study of sequential/state machine design techniques and applications with an emphasis on VHDL and ASIC devices. Laboratory projects with formal reports.
Prerequisites & Notes: ETEC 272; ETEC 273 or CSCI 227.
Credits: 5 Grade Mode: Letter
|
|
-
ETEC 374 - Microprocessor Applications Upper-division study of microprocessors, support devices, and peripheral equipment and their integration into microcomputer systems. Study of various hardware configurations and interfacing techniques. Application-oriented laboratory experiments and design problems.
Prerequisites & Notes: ETEC 274 or CSCI 227; ETEC 373
Credits: 5 Grade Mode: Letter
|
|
-
ETEC 375 - Electronic Systems A study designed to acquaint the student with the operation of electronic systems. Feedback systems, multi-phase power systems and solid state control systems. Structured laboratory with emphasis on experimental verification of results, original design, data analysis and formal report preparation.
Prerequisites & Notes: ETEC 272
Credits: 5 Grade Mode: Letter
|
|
-
ETEC 376 - Electrical Power A study of electrical power concepts and components. Topics will include complex numbers, three-phase power systems, DC and AC motors and generators, control system components and power electronics. Laboratory investigation of characteristics of above components and systems.
Prerequisites & Notes: ETEC 371 and PHYS 162 or concurrent; or written permission.
Credits: 4 Grade Mode: Letter
|
|
-
ETEC 377 - Instrumentation An introduction to electronic instrumentation techniques. Topics include sensors, signal conditioning circuits and noise reduction. Sensor topics include force, torque, pressure, acceleration and temperature. Signal conditioning topics include bridge circuits, amplifiers, filters and analog-to-digital conversion. Laboratory investigation of characteristics of above components and systems.
Prerequisites & Notes: ETEC 379
Credits: 4 Grade Mode: Letter
|
|
-
ETEC 378 - Network Analysis General analysis of linear networks using classical methods, Laplace transforms and computer-aided methods. Topics include single element transients, first- and second-order circuits, transfer function analysis and Bode plots.
Prerequisites & Notes: ETEC 371; MATH 321 or concurrent; EET major or written permission.
Credits: 4 Grade Mode: Letter
|
|
-
ETEC 379 - Active Linear and Non-Linear Circuits Upper-division treatment of active linear and non-linear circuits. Analysis, design, testing, and evaluation of electronic circuits and subsystems with primary emphasis on the application of integrated circuit components and modules. Computer modeling of complex electronic circuits with frequency response, sensitivity and worse-case analysis. Laboratory projects with formal report preparation.
Prerequisites & Notes: ETEC 375, ETEC 378 or written permission
Credits: 5 Grade Mode: Letter
|
|
-
ETEC 380 - Advanced Power Mechanics Introduction to engine design and development including calculating efficiency, power, designing cylinder heads and blocks, engine simulation, testing and air flow port development.
Prerequisites & Notes: ETEC 280
Credits: 5 Grade Mode: Letter
|
|
-
ETEC 381 - Advanced Power Transmission Principles of automatic transmission function, hardware and controls are covered. Practical approach to manual transmission design including structural housings, geartrain, bearing selection and shift system elements.
Prerequisites & Notes: ETEC 225, ETEC 281.
Credits: 3 Grade Mode: Letter
|
|
-
ETEC 382 - Automotive Electronics Basic principles of automotive communication networks and control systems, operation and calibration of sensors and actuators, vehicle wiring harness design considerations, wiring diagrams, diagnostics and troubleshooting.
Prerequisites & Notes: ETEC 280
Credits: 4 Grade Mode: Letter
|
|
-
ETEC 402 - Cooperative Work/Study Supervised study of technical problems associated with production and/or management in business and industry. Credit varies according to individual employment circumstances, the degree requirements of the applicant and the extent to which employment is related to major. Repeatable to a maximum of 9 cr.
Prerequisites & Notes: Junior status; approval of advisor.
Credits: 1-9 Grade Mode: Letter
|
|
-
ETEC 405 - Communications Circuits A study of communications concepts including analog and frequency modulation and detection methods, r.f. amplifier and oscillator circuits and transmitter and receiver principles. Structured laboratory with emphasis on experimental verification of principles, use of specialized equipment, data analysis and formal report preparation.
Prerequisites & Notes: ETEC 375; MATH 321 or concurrent; EET major or written permission.
Credits: 4 Grade Mode: Letter
|
|
-
ETEC 412 - Industrial Design Internship Faculty-supervised industrial design internship with an approved firm, manufacturer or design consultancy. The internship requires a total of 10 weeks (may be more than one internship) of practical application of industrial design skills in a business, public or industrial setting. Repeatable up to 12 credits.
Prerequisites & Notes: ETEC 318 or permission of instructor.
Credits: 4 Grade Mode: Letter
|
|
-
ETEC 413 - UX Design Capstone This course is the culminating multidisciplinary design project class for User Experience (UX) Design Minors. Students representing each discipline; psychology, computer science, industrial design and graphic design, come together to design a user experience. This course incorporates all of their skills and knowledge together into a realistic project. The process will include; team management, problem discovery, design research, concept development, prototyping, user testing and development. It may be sponsored by industry and guided by UX professionals.
Prerequisites & Notes: UX Design Minors only. PSY 210; ETEC 311; DSGN 249. Or permission of instructor.
Credits: 4 Grade Mode: Letter
|
|
-
ETEC 414 - Senior Industrial Design I Studio course work with a strong focus on art and craftsmanship. Through the design of various products, a validation of artistic expression and technical skills will be realized.
Prerequisites & Notes: ETEC 318
Credits: 5 Grade Mode: Letter
|
|
-
ETEC 415 - Industrial Design Internship Presentation Follow-up course to ETEC 412. A formal presentation of a recently completed industrial design internship which includes a visual presentation and report. Repeatable up to 3 credits.
Prerequisites & Notes: ETEC 412
Credits: 1 Grade Mode: Letter
|
|
-
ETEC 416 - Senior Industrial Design II Studio course work with a strong focus on the functional and engineering aspects of industrial design. Emphasis on manufacturability of products with importance placed on materials and processes.
Prerequisites & Notes: ETEC 414
Credits: 5 Grade Mode: Letter
|
|
-
ETEC 418 - Senior Industrial Design III Studio course work with a strong focus on entrepreneurialism. Business aspects of industrial design are explored and applied in the design projects.
Prerequisites & Notes: ETEC 416
Credits: 5 Grade Mode: Letter
|
|
-
ETEC 419 - Directed Research in CAD/CAM Research problem in Computer-Aided Design and Manufacturing conducted under supervision. Repeatable to a maximum of 9 credits, including original course.
Prerequisites & Notes: ETEC 361 or ETEC 362; ETEC 322.
Credits: 1-3 Grade Mode: Letter
|
|
-
ETEC 420 - Manufacturing Automation and Robotics An introduction to the automation of manufacturing and assembly operations. Topics include design process and design for assembly, parts feeding, sensors and actuators for automation, fundamentals of robotics, including robot programming, programmable logic controllers for industrial applications, and machine vision systems.
Prerequisites & Notes: ETEC 322, ETEC 326; ETEC 351 or ETEC 374
Credits: 4 Grade Mode: Letter
|
|
-
ETEC 422 - Manufacturing Project Definition Selection, definition and analysis of a problem suitable for senior project, prior to actual project development. Includes consideration of project parameters and implications, analysis of alternative solutions and justification of selected solution. Culminates in writing of formal senior project proposal.
Prerequisites & Notes: Co-requisite ETEC 341; and ETEC 444 or concurrent.
Credits: 1 Grade Mode: Letter
|
|
-
ETEC 424 - Manufacturing Implementation Follow-up to ETEC 422. Manufacture a product or design an industrial process. Project will be fully documented, including final report and presentation, with performance specifications, functional description, schematics, cost analysis, parts list, photographs, diagrams, and charts.
Prerequisites & Notes: ETEC 422
Credits: 4 Grade Mode: Letter
|
|
-
ETEC 425 - Machine Design Design and modeling of machine components (gears, bearings, shafts, etc.) with an emphasis on industrial practices. Theoretical dynamics also is included.
Prerequisites & Notes: ETEC 225
Credits: 4 Grade Mode: Letter
|
|
-
ETEC 426A - Advanced Computer Numerical Control - Surfacing and Contours CNC programming techniques and requirements for manufacturing components on CNC machining centers, emphasizing programming and applications of three-dimensional surfaces and contours.
Prerequisites & Notes: ETEC 322; ETEC 362 or instructor permission.
Credits: 3 Grade Mode: Letter
|
|
Page: 1 <- 5
| 6
| 7
| 8
| 9
| 10
| 11
| 12
| 13
| 14
| 15
… Forward 10 -> 35 |